| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
VMS V6.1
HUBwatch V3.1.3
My customer has a problem similar to that reported in note 2284.2,
but a tab bit different.
When searching for duplicates from the agent 149.42.128.11 via
the "main" hub they get the following:
Mac Address Agent IP Address Community Slot Port
00-00-94-00-aa-1f 149.42.128.11 main 4 4
00-00-94-00-aa-1f 149.42.128.11 main 4 4
00-00-94-00-c7-77 149.42.128.11 main 4 3
00-00-94-00-c7-77 149.42.128.11 main 4 3
00-00-94-07-f6-23 149.42.128.11 main 5 5
00-00-94-07-f6-23 149.42.128.11 main 5 5
00-00-94-20-2a-d1 149.42.128.11 main 4 1
00-00-94-20-2a-d1 149.42.128.11 main 4 1
.
.
.
This goes on for 100 lines. As you can see each line is duplicated.
Could someone help me understand what this output is telling us.
This is only happening from this one hub. They though it was a
hardware problem and have swap out every piece of hardware in that
hub including the backplane.
Any help would be greatly appreciated.
Thanks,
Ed Gallagher
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3321.1 | Works on a PC...what the ...? | RTP4ME::GALLAGHER | Put me in coach! | Tue Mar 05 1996 17:47 | 9 |
Just came across a twist to this situation. We tried this same
functions (the duplicate node pull down) on a PC running V4.1.1,
and no duplicates were found.
Could someone please explain? Has anyone seen this before
on a VMS/HubWatch V3.1.3 system?
Any help would be greatly appreciated,
Ed Gallagher
| |||||