[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3262.0. "reductant-link support on DR90TS?" by SNOFS1::63496::CHIUANDREW () Sun Feb 11 1996 22:15

    Hi,
    
    Just want to confirm the function of DR90TS (running V2.0 firmware
    DETMI200.bin from DCF V4.1.2):
    
    1) Does it support the reductant-link feature, so that it can monitor
    the primary and secondary links as a master in a 3 DECrepeater 90TS
    loop configuration?
    
    we have this feature on PORTswitch900TP (as documented in dual-port
    redundancy - appendix B), our customer would have to use the
    DECstackable with 3 X DR90TSs to have full redundancy over UTP cable.
    
    Can it be done with DR90TS?
    
    
     
    thanks in advnace for help!
    Andrew Chiu - Network services Sydney
T.RTitleUserPersonal
Name		DateLines
3262.1Can't do itNETCAD::HERTZBERGHistory: Love it or Leave it!Mon Feb 12 1996 12:1310
    No, the 90TS is unable to act as either a master or a responder for DPR
    configurations.  
    
    Like any 10Base-T repeater (even non-Digital), it can act as a
    non-responder, giving partial fault coverage.
    
    This is a hardware limitation of the chips around which the 90TS,
    900TM, and 900GM are designed.
    
    							Marc