[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3218.0. "Routing s/w for 900EF&EE" by HGOM11::HUMPHREYTAN () Wed Jan 31 1996 00:47

    Hi,
    
    I have down loaded a routing s/w for DECswitch 900EF. But there is
    only a DECswitch 900EE in my office. Do they use the same routing
    software?
    
    regards,
    
    Humphrey
T.RTitleUserPersonal
Name		DateLines
3218.1the routing software is differentULYSSE::YLOUPC::LOUISWed Jan 31 1996 10:5814
Due to different hardware, (6 x Eth) vs (6 Eth + 1 x fddi)
the routing software is different.

6 different software for 2 different modules 
			
	DECswitch 900EE Switch	(6 Ethernet)	
        DECswitch 900EE IP Router            
        DECswitch 900EE MP Router               

	DECswitch 900EF	Switch (6 Enet, 1 FDDI)	
        DECswitch 900EF IP Router            
        DECswitch 900EF MP Router               

yves
3218.2NETCAD::MILLBRANDTanswer mamWed Jan 31 1996 15:486
The EE switch accepted the software for the EF???
Boo!  Go complain in IROCZ::COMMON_BROUTERS, too. 
Software images should have identification in their
image headers, and devices should check them!

	Dotsie