[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3157.0. "Gigaswitch FDDI --- Using "find" IP Address" by NCMAIL::SCHEID () Mon Jan 15 1996 00:08

T.RTitleUserPersonal
Name		DateLines
3157.1NETCAD::DRAGONMon Jan 15 1996 11:299
    
    Charlie,
    
    	What platform and version of HUBwatch is the customer running. I
        just tried this on HUBwatch V4.1 on Digital Unix and it worked.
        Both slot and port were reported properly. Also, what was the
        status reported for the address (ie learned).
    
    Bob
3157.2HW4.1 for Windows... Port Status learnedNCMAIL::SCHEIDMon Jan 15 1996 12:5210
    
    HW for WIndows V4.1
    
    G/S FDDI firmware SCP v2.2
    
    Line Card is correct
    Port is always "0" 
    Status - Learned
3157.3NETCAD::DRAGONMon Jan 15 1996 13:046
    
    Charlie,
    
    	Thanks for the additional info..
    
    Bob
3157.4NETCAD::DRAGONMon Jan 15 1996 13:137
    
    Charlie,
    
    	I've been able to reproduce this under HUBwatch V4.1 for Windows.
        I'll QAR it.
    
    Bob