[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

3023.0. "HUB LOOSING SETUP" by ATHINA::MAVRANDONIS () Fri Dec 01 1995 07:01

    Hello out there.
    
    I would like to ask why the fabules DEChub 900 MULTIswitch (agent)
    looses it's setup after power failure. It doesn't happen all the time,
    and we have to send an engineer that remembers the setup of the site
    in order to reconfigure the HUB(s).
    
    Is there a logical explanation or is something we are doing wrong.
    
    Thanks in advance for the help.
    
    Thanos

T.R Title User Personal
Name Date Lines

3023.1 NETCAD::DOODY Michael Doody Fri Dec 01 1995 12:18 10

T.R	Title	User	Personal Name	Date	Lines
3023.1		NETCAD::DOODY	Michael Doody	`Fri Dec 01 1995 12:18`	10
	It could be a bug. It could even be a bug that is already fixed. I cannot tell you because you haven't given me any information. Perhaps you are running old firmware? There were some problems related to power failure fixed in MAM v4.1. You may want to check the errorlog to see if it shows trouble. We do a great deal of testing, but there are many ways to set up a hub. -Mike

    It could be a bug. It could even be a bug that is already fixed.
    I cannot tell you because you haven't given me any information. Perhaps
    you are running old firmware? There were some problems related to power
    failure fixed in MAM v4.1.
    
    You may want to check the errorlog to see if it shows trouble.
    
    We do a great deal of testing, but there are many ways to set up a hub.
    
    -Mike