Conference netcad::hub_mgnt

2987.0. "Error Upgrading Decbridge 90/HUB_LOAD.COM." by VAXRIO::HENRIQUE () Mon Nov 20 1995 17:27

    Hi,
    
    I am trying to upgrade Decbridge 90 V2.0 to V3.9 using 
    HUB_LOAD.COM and i'm getting the following error :
    
    
    RDVAX1>@HUB_LOAD
    
    Please be sure to DISABLE any TFTP or BOOTP service running
    on your system before proceeding.  If UCX (or equivalent) TFTP
    or BOOTP services are running NDU will *NOT* be able to upgrade.
    
    Use the UCX commands:
         SET SERVICE BOOTP/DISABLE
         SET SERVICE TFTP/DISABLE
    
    And, do a SHOW SYSTEM and STOP/ID any BOOTP or TFTP processes.
    
    Push RETURN to continue...
    
    
    
    Select the device to be loaded:
    
         1.) DECagent 90                    10.) DECrepeater 900TM                  
                   
         2.) DECbridge 90, 90FL             11.) DECswitch 900EE                    
                          
         3.) DECconcentrator 900MX          12.) DECswitch 900EF                    
                             
         4.) DECconcentrator 900TH          13.) PEswitch 900TX                     
                             
         5.) DEChub 900 MultiSwitch         14.) PORTswitch 900CP                   
                              
         6.) DECmau 900TH                   15.) PORTswitch 900FP                   
                    
         7.) DECrepeater 90FS               16.) PORTswitch 900TP                   
                        
         8.) DECrepeater 90TS               17.) EXIT                               
                        
         9.) DECrepeater 900GM                             
     
    Enter your selection: 2
    Device Ethernet address: 08-00-2B-2F-2C-E4
    Firmware image (MOM$LOAD:DEWGB390.SYS): 
    Image will be MOM$LOAD:DEWGB390.SYS
    
    (c) Digital Equipment Corporation. 1993. All Rights Reserved.
    %NDU-E-MEMLD_ERROR, error during memory load message
    %NDU-E-NORESP_ERR, no response from target
    %NONAME-E-NOMSG, Message number 00000002
    ----------------------------------------------------------------
    RDVAX1>DOWNLOAD SHOW DEVICE  08-00-2B-2F-2C-E4
    
    (c) Digital Equipment Corporation. 1993. All Rights Reserved.
    %NDU-E-READ_DEVICE, error during read device
    %NDU-E-NORESP_ERR, no response from target
    %NONAME-E-NOMSG, Message number 00000002
    
    ----------------------------------------------------------------
    RDVAX1>DOWNLOAD SHOW VERSION                  
    
    (c) Digital Equipment Corporation. 1993. All Rights Reserved.
    DECndu (Network Device Update) Utility PLUS V1.0f
    
    -----------------------------------------------------------------
    
    
    Both, TFTP and BOOTP has been disabled.
    
    I have Decnet/osi V6.1 running on my system.
    
    
    Could someone please, help me on this.
    
    
    Thanks.
    
    Henrique - MCS Brazil