| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 2979.1 | | STRWRS::KOCH_P | It never hurts to ask... | Tue Nov 14 1995 18:23 | 6 |
|
He could either buy a DECswitch 900EE, DECswitch 900EF or 2 DECrepeater
90T-16 with the AUI Multistack on each backbone with a 10BaseT x-over
cable connecting the two of them.
I suspect other people can come up with more variations...
|
| 2979.2 | thanks | VAXRIO::HENRIQUE | | Wed Nov 15 1995 19:28 | 2 |
| ok. Thanks for hints.
|
| 2979.3 | DECrepeater 900GM & DEChub ONE | NETCAD::PAGLIARO | Rich Pagliaro, Networks BU, HPN | Wed Nov 15 1995 20:18 | 10 |
| A DECrepeater 900GM configured in a DEChub ONE docking station offers 2
AUI repeater ports (one on the front bezel and one on the docking
station), and 24 10Base-T repeater ports (using 2 50-pin TELCO
connectors).
This is cheaper than buying a DECswitch, I would suspect, and is
cleaner than daisy chaining 2 DECrepeater 90T-16s. That is, it results
in only one repeater hop instead of two.
|
| 2979.4 | Would the 90FS do it ? | PTOJJD::DANZAK | | Thu Nov 16 1995 10:49 | 10 |
| *IF* a DECrepeater 90FS supports an AUI on the back cover in a DECstack
unit....then you would have an AUI on the front and one on the back.
(If it doesn't....duuh)
Regards,j
p.s. does the 90FS support AUI on the back cover like the 90TS and
90T16?
|
| 2979.5 | | STRWRS::KOCH_P | It never hurts to ask... | Thu Nov 16 1995 20:03 | 8 |
| J,
Be careful when you say that the 90TS supports AUI. It only support
AUI in the standalone version, NOT the stackable version.
I hope the engineers are given some time to implement the firmware
to support the 90TS/AUI stackable in the near future. I think that is a
valuable product.
|
| 2979.6 | Not | NETCAD::HERTZBERG | History: Love it or Leave it! | Mon Nov 20 1995 13:04 | 13 |
| The 90FS does NOT support the rear-cover AUI.
And I believe it was discussed earlier that the support for the rear
cover AUI by the 90TS is not strictly a firmware issue. To summarize,
it was decided not to support it because when you use the AUI port on a
90TS, you lose the thinwire port, which is the backbone for the stack,
so it doesn't make a whole lot of sense when this is considered.
Furthermore, there are electrical reasons why it might not work...
differences between the 90TS rear cover and the stackable rear cover.
In conclusion, we have no plans to attempt this.
Marc
|