| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2875.1 | NPSS::WADE | Network Systems Support | Wed Oct 18 1995 13:10 | 6 | |
Could you provide a diagram showing the config and describing where the
problem exists? And provide the firmware revs on all modules.
Bill
| |||||
| 2875.2 | Forwarded to some folks for consumption & analysis.... | NETCAD::BATTERSBY | Wed Oct 18 1995 13:12 | 4 | |
I've forwarded this to some of our guru's here at LKG. Stay tuned
hopefully for an answer.
Bob
| |||||
| 2875.3 | NPSS::WADE | Network Systems Support | Wed Oct 18 1995 18:22 | 9 | |
re .0
You probably won't get much of an answer until you provide the data
requested in .1
Bill
| |||||
| 2875.4 | Firmware revisions and config | HAN::JCARSTENS | Thu Oct 19 1995 09:45 | 45 | |
Hi Bill,
thanks for quick reading and answering my question.
The firmware levels are:
DECbridge 900MX and DECswitch 900EF ----> DEFBA150.BIN
DECconcentrator 900MX ----> DEF6X301.BIN
PORTswitch 900CP ----> DECPM202.BIN
DEChub900 ----> DMHUB402.BIN
Now I will try to show you the configuratiion:
A B C D
----- SUN ----- ----- -----
|----| 9 | G ---| C | |-----| 9 | | 9 |
||---| 0 |---- HP | O | | |---| 0 | | 0 | E
|||--| 0 | H | ---| N | | | | 0 |-----| | 0 |----
||||-| C |-- | DEC | C | | | | E |---| | | M | F |
|||| | P | | | ---| | | | | F | | | | X |--- |
|||| ----- | | ----- | | ----- | | ----- ||
|||| | | || | | || | | || ||
FDDI |||| =======|=|================|=|===========|=|=========== ||
|||| | | | | | | ||
LAN1 |||| -------|-|----------------|-|-----------|-|-------------||-
|||| | | | | | |
LAN2 |||| ---------|----------------|-|-----------|-|-------------|--
|||| | | | |
LAN3 ||||---------------------------|-|-----------|-|----------------
||| | | |
LAN4 |||------------------------------|-----------|-|----------------
|| | |
LAN5 ||-------------------------------------------|-|---------------
| |
LAN6 |----------------------------------------------|---------------
Some more info for D: HW=v0/2,ro=v0.2
for C: HW=v1/2,ro=v0.4
The problems is:
From the SUN connected to B, over FDDI to D, then over E or F to
G or H at A and from there to clients connected via 10B2 NFS is o.k.
But from SUN connected to B, over FDDI to C there's no NFS function
over the four connected ethernet ports to A.
| |||||
| 2875.5 | NPSS::WADE | Network Systems Support | Thu Oct 19 1995 13:15 | 6 | |
This may be related to a problem in DEFBA150.BIN (fixed in 1.5.2).
I suggest that you upgrade your DEChub, DEF6X and DEFBA's to the revs in
the 4.1 consolidated firmware kit.
Bill
| |||||