[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2871.0. "PortSwitch Window 1-32 vs. a1-a8, B1-b8 ...etc." by NCMAIL::SCHEID () Tue Oct 17 1995 00:30

    
    One of my larger customers has Portswitch 900TP repeaters and thinks
    they are terrific... but they asked a why did'nt we do it this way 
    question ... On the Portswitch grouping window ... why are the ports
    numbered 1-32 ... and not A1-A8, B1- B8, C1-C8 etc... The customer's 
    reasoning behind this is that the Network manager creates the groups
    ... and then sends a technican to the closet to place the appropriate
    cables to the ports ... and has to translate the groupings to what they 
    see on the front bezel of the 900TP ... i.e. group one ports 4,23,14 
    = A4, C7, B6 ... 
    
    
    
    -Charlie

T.R Title User Personal
Name Date Lines

2871.1 One more Vote CGOOA::VAOP05::Szostak Am I NIS or NAC ? Wed Oct 25 1995 19:06 7

T.R	Title	User	Personal Name	Date	Lines
2871.1	One more Vote	CGOOA::VAOP05::Szostak	Am I NIS or NAC ?	`Wed Oct 25 1995 19:06`	7
	I can add another tick to the list, my customer just purchased the 900TP and we ran into the same problem configuring the module with HUBwatch, the customer had to develope a mapping diagram for his techs so they didn't have to use there fingers to count out the ports. -Richard -NIS VAO

I can add another tick to the list, my customer just purchased the 900TP
and we ran into the same problem configuring the module with HUBwatch,
the customer had to develope a mapping diagram for his techs so they 
didn't have to use there fingers to count out the ports.

-Richard
-NIS VAO