| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Hi!
We tried DETMM F/W update from 1.0G to 2.0.0, and trouble occured.
DETMM restart fail after NEW F/W V2.0.0 down load complete .
BAD DETMM display several pattern led lit and stay "power ok",
"network ok" ,and "1" LEDs lit on when power up.
Other Modules update are normal complete.(dmhub410,defba152,def6x311)
I guess,
If DETMM port communications active (W/Ss communicate through DETMM),
DETMM update incomplete.
Because We success update DETMM that have no connection.
I want know,
Is ther any requirement for DETMM V2.0.0 update ?
DEChub900 mam version : V4.1.0
DECrepeater900 version: HW=v2,RO=v1,SW=v1.0G
HUB module config
slot1 : DECbridge900
2 : DECconcent900
3 : DECrepeater900
4 : DECserver900
5-8 : blank
VS4000 M90A <--- load host
+
HUBswitch900#0 + (10baseT)
(DEFBA DEF6M DETMM)
\ \
\ \ (FDDI DAS)
\\\\\\ GIGASWITCH \\\
\ \
\ \
HUBswitch900#1 \ \
(DEFBA DEF6M DETMM) \ (FDDI DAS RING)
\ \
\ \
HUBswitch900#2 \ fail \
(DEFBA DEF6M DETMM) \
\ \
\ \
HUBswitch900#3 \ fail \
(DEFBA DEF6M DETMM) \
\ \
\\\\\\\\\\\\\\\\\\\\\\\\\\\
Thanks for any answer.
Mune
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2840.1 | Second failure of exact same type | ROMEOS::HARRIS_MA | Sales Executive II | Mon Oct 09 1995 22:44 | 6 |
THIS IS EXACTLY WHAT HAPPENED TO ME! PERHAPS SOMEONE COULD LOOK AT THE
ISSUE BACK IN LKG?
My DR900TM is still very dead, exactly as described in previous note.
Mark
| |||||
| 2840.2 | Engineering is checking | NETCAD::ROUNDS | Tue Oct 10 1995 13:08 | 6 | |
We are currently doing upgrades on DETMM to see if there is an upgrade
problem.
| |||||
| 2840.3 | at least 15minutes before unpower. | ROMEOS::HARRIS_MA | Sales Executive II | Tue Oct 10 1995 17:04 | 6 |
Thanks for looking into it. I didn't touch the module for more than
15mins after the upgrade started. I assumed it wouyld come back on-line
by itself and then after 15min. I pulled the module and then
re-installed it to try and reset.
No luck,
M
| |||||
| 2840.4 | re: CONFIGURATION | TKTVFS::OHTSUKA_MU | Wed Oct 11 1995 04:32 | 94 | |
Hi!
Thanks for your reply.
Today We tried 3 DETMM update again and one DETMM failed .
[ Fail log]
KekMC1> download load /force=pcommon 130.87.143.5 detmm200.bin
(c) Digital Equipment Corporation. 1993. All Rights Reserved.
DECNDU: (TFTP) Target address = 130.87.143.5
[PCOMMON] Getting sysDescr
DECrepeater 900TM 32 Port TP Ethernet Rptr SNMP, HW=v2,RO=v1,SW=v1.0G
[PCOMMON] Setting server IP address (pcomLoadIpHostAddr).
[PCOMMON] Getting Server IP Address
130.87.1.17
[PCOMMON] Setting filename (pcomLoadFilename).
[PCOMMON] Get filename.
DETMM200.BIN
[PCOMMON] Setting AdminStatus/trigger (pcomLoadAdminStatus).
[PCOMMON] TFTP serve.
DECNDU: (TFTP) Blocks sent = 903
DECNDU: (TFTP) Transfer Complete.
[PCOMMON] TFTP server completed.
[PCOMMON] Polling for sysDescr
[PCOMMON] Getting sysDescr
DECNDU: ERROR STATUS = No response from device.
Fail DETMM display lit on LEDs.
DC ok,network ok
1,2,3,6,7,8
a,b,c,d total 12 leds.
And then RE-powered, DETMM display seviral pattern led and stop
below status
DC ok,network ok
1 total 3 leds.
hardware description
pn DETMM-M
rev C01
sn AS40205740
mac 08-00-2b-a3-b2-59
configuration
LoadHost is VS4000m60 VAX system .
We use ndu+ (download command) and config summary is below.
A Gigaswitch have 14 DAS ring for DECnis600s and 1 DAS ring
for a hubswitch.
Each DECnis600 have another DAS ring for HUBswitchs include
target DETMMs for F/W v-up.
One DECswitch have a VS4000 loadhost through a DECrepeater900.
Down load path is
VS4000 > DETMM > DEFBA > gigaswitch > DECnis600
> DEFBA on target hub> target DETMM
das ring
V
G ----DECnis600 ---HUB#1---HUB#2---HUB#x-+
I ----+ + + <- das ring
G +--------------------------+ for hub
+--- A | |
hub +--- s
V w | |
VS4000 i 14 14
load host c DECnis600s HUB rings
h
Regards,
Mune
| |||||