| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
We are pleased to announce the network availability of the
DEChub Consolidated Firmware V4.1.1 Kit
****************************************************************
* *
* IMPORTANT NOTES *
* *
* You must upgrade to HUBwatch V4.1 in order to manage *
* devices that are upgraded to the firmware versions *
* provided in this kit. *
* *
* The DEChub 900 MultiSwitch Hub Manager should be *
* upgraded before upgrading other modules in the hub. *
* *
* Please read the product release notes before upgrading *
* any device with new firmware. *
* *
****************************************************************
This release of the DEChub Consolidated Firmware contains the firmware
images and product release notes for the following DEChub products:
DECagent 90 V3.0.1 denma301.sys
DECbridge 90, 90FL V3.9 dewgb390.sys
DECconcentrator 900MX V3.1.1 def6x311.bin *
DECconcentrator 900TH V3.1.1 defhu311.bin *
DEChub 900 MultiSwitch V4.1.0 dmhub410.bin *
DECmau 900TH V1.2.1 dtmxm121.bin *
DECrepeater 90FS v2.0.0 defmi200.bin
DECrepeater 90TS v2.0.0 detmi200.bin
DECrepeater 900GM v2.0.0 dettm200.bin *
DECrepeater 900TM V2.0.0 detmm200.bin *
DECswitch 900EE v1.1.1 debmp111.bin *
DECswitch 900EF v1.5.2 defba152.bin *
PEswitch 900TX v1.1.1 desbf111.bin *
PORTswitch 900CP v2.1.0 decpm210.bin *
PORTswitch 900FP v2.0.0 defmm200.bin *
PORTswitch 900TP v2.1.0 detpj210.bin *
Image names marked with an asterisk (*) are new images or supersede the
version in the DEChub Consolidated Firmware V4.1 kit.
Product release notes are provided in ASCII text and PostScript formats.
Firmware images for all products with the following exceptions can be
loaded via the HUBloader utility. The DECbridge 90, DECbridge 90FL and
pre-V2.x firmware DECagent 90 can be loaded using the DECndu Plus
utility.
The HUBloader utility is provided with HUBwatch V4.1. It is also
provided on separate installation media for Microsoft Windows(TM).
HUBloader documentation is provided in the HUBloader Online Help.
The DECndu Plus utility is provided on separate installation media.
1
The file "denmalod.sys" is provided with the DECagent 90 firmware. Use
of this file is required when upgrading a DECagent 90 running V1.0
firmware. See the DECagent 90 release notes for details about upgrading
using the two-step load method.
The DECpacketprobe 90 firmware is no longer provided in this kit. This
firmware is now available by ordering QB-219AA-SB for the first probe,
and QM-219AA-AA for each additional probe.
DECnet access to the DEChub Consolidated Firmware
=================================================
Kits for the Digital UNIX, OpenVMS VAX and Windows platforms are posted
in the ONEHUB area at NETCAD::PROJ$722:[ONEHUB.RELEASE.FIRMWARE.V4_1_1].
(NETCAD:: == 56821:: == 55.501)
Each directory contains a $$FILES_IN_HERE.TXT file which describes the
contents of the directory.
Windows
-------
NETCAD::PROJ$722:[ONEHUB.RELEASE.FIRMWARE.V4_1_1.DOS]
DISK1.EXE;1 2708/2709 27-SEP-1995 09:50:06.97
DISK2.EXE;1 2852/2853 27-SEP-1995 09:50:18.43
DISK3.EXE;1 2076/2076 27-SEP-1995 09:50:25.46
DISKBLD.TXT;1 4/6 27-SEP-1995 08:56:31.70
README.TXT;1 20/21 27-SEP-1995 08:56:46.91
The files which make up the three diskettes are provided as
self-extracting archives (DISK1..2..3.EXE). See DISKBLD.TXT for
instructions on copying the files to your PC and building the
three diskettes.
Instructions for installing the kit after the diskettes are built
can be found in the README.TXT file.
OpenVMS VAX
-----------
NETCAD::PROJ$722:[ONEHUB.RELEASE.FIRMWARE.V4_1_1.VMS]
DCFU1041.A;1 90/90 27-SEP-1995 11:06:36.00
DCFU1041.B;1 16902/16902 27-SEP-1995 11:06:41.00
DCFU1041.C;1 6048/6048 27-SEP-1995 11:13:24.00
DCFU1041.RELEASE_NOTES;1 19/21 27-SEP-1995 08:43:35.42
The release notes contain instructions on how to install the kit
onto your OpenVMS VAX system.
Digital UNIX
------------
NETCAD::PROJ$722:[ONEHUB.RELEASE.FIRMWARE.V4_1_1.UNIX]
HBFIRM411.TAR;1 9380/9381 27-SEP-1995 10:16:02.27
README.TXT;1 21/21 27-SEP-1995 10:18:04.92
The README.TXT file contains instructions on how to install the
kit onto your Digital UNIX system.
2
Network Product Business BBS
============================
The firmware files and release notes contained on this kit, as well as
much more information on our Networking products, are available on our
Bulletin Board Service.
We invite you to explore the BBS. All you need is a PC and a modem.
Dial 508-486-5777 (U.S.A.) or DTN 226-5777. Set your modem to 8 bits,
no parity, 1 stop bit.
Once logged in, all the firmware files and release notes may be found
in the Products/Technology area.
From the Main Menu,
select [T] Products/Technology
then [H] Hub Products
finally [1] Latest Firmware
FTP
===
The files which make up the kit can be accessed via anonymous ftp from
ftp.digital.com (IP address = 16.1.0.2) and are in the /pub/DEC/hub900
directory.
Network Product Business World Wide Web
=======================================
Our Home Page can be found inside the Digital firewall at:
http://npbwww.hpn.lkg.dec.com
Or if you're outside the firewall at:
http://www.networks.digital.com
Europe: http://www.networks.europe.digital.com
Australia: http://www.digital.com.au/networks
(Click on "Products & Technology", then "Technical Data",
and finally "Hubs Firmware")
DECnet access to DECndu Plus
============================
DOS: NETCAD::PROJ$706:[NDU.V3.RELEASE.DOS.SSB]NDUPLUS.ZIP
OpenVMS: NETCAD::PROJ$706:[NDU.V3.RELEASE.VMS.POST_VMS_5_5]NDUPLUS010.A
Please return comments, etc. to NETCAD::GABIS.
Thanks,
Christine
3
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2.1 | Note to OpenVMS VAX users | NETCAD::GABIS | Thu Sep 28 1995 19:02 | 10 | |
-< Note to OpenVMS VAX users >-
Devices running the firmware in the DEChub Consolidated Firmware Kit
V4.0-1/V4.1 require HUBwatch V4.0/V4.1 respectively for management.
This means that if you are running the version of HUBwatch for OpenVMS
VAX (V3.1) you cannot upgrade your devices to the firmware in the
DCF V4.0-1/V4.1 kits until HUBwatch for OpenVMS VAX V4.1 is available.
| |||||
| 2.2 | V4.1 for VMS -----WHEN!!!!! | MADMXX::WOESTEMEYER | Why??...Why not!!! | Sun Oct 08 1995 01:33 | 7 |
A customer has 900 modules that require a minimum of Hubwatch V4.0, ie
a DECconcentrator 900TH and PORTswitch 900TP. He is running hubwatch
for VMS V3.1, since there was not a V4.0 of HUbwatch for VMS, when will
V4.1 for VMS be available??
Steve Woestemeyer
DTN 592-4208
| |||||
| 2.3 | SLINK::HOOD | My God, what have I done to my spleen? | Mon Oct 09 1995 18:41 | 3 | |
For about the 2 billionth time, "For dates, contact the product manager, Jack NAC::Forrest" | |||||
| 2.4 | V4.1.2 Kit now available | NETCAD::FORINO | Tue Jan 16 1996 15:02 | 31 | |
Note that there is now an upgrade to the DEChub Consolidated
Firmware V4.1.1 Kit. This upgrade is V4.1.2. The only difference
between this kit and V4.1.1 is that the V4.1.2 kit contains a valid
firmware file for the PORTswitch 900CP. The original firmware
file for the PORTswitch 900CP on the V4.1.1 kit was corrupted.
The version number of the PORTswitch 900CP remains at v2.1.0.
DECnet access to the DEChub Consolidated Firmware
=================================================
Kits for the Digital UNIX, OpenVMS VAX and Windows platforms are posted
in the ONEHUB area at NETCAD::PROJ$722:[ONEHUB.RELEASE.FIRMWARE.V4_1_2].
(NETCAD:: == 56821:: == 55.501)
Each directory contains a $$FILES_IN_HERE.TXT file which describes the
contents of the directory.
Windows
-------
NETCAD::PROJ$722:[ONEHUB.RELEASE.FIRMWARE.V4_1_2.DOS]
OpenVMS VAX
-----------
NETCAD::PROJ$722:[ONEHUB.RELEASE.FIRMWARE.V4_1_2.VMS]
Digital UNIX
------------
NETCAD::PROJ$722:[ONEHUB.RELEASE.FIRMWARE.V4_1_2.UNIX]
For detailed information see the base note (2.0).
| |||||
| 2.5 | Firmware pointers that are up to date??? | CGOS01::DMARLOWE | Have you been HUBbed lately? | Tue Oct 15 1996 21:06 | 9 |
| 2.6 | HELLOOOOOOOooooo..... | CGOS01::DMARLOWE | Have you been HUBbed lately? | Wed Oct 16 1996 20:23 | 4 |
| 2.7 | On the web... | SLINK::HOOD | Your bad news bear | Wed Oct 16 1996 20:55 | 8 |
| 2.8 | CSC32::D_PERRIN | Wed Oct 23 1996 15:28 | 5 | ||
| 2.9 | Alas...the customer is always right.... | NETCAD::BATTERSBY | Wed Oct 23 1996 17:04 | 13 | |
| 2.10 | CSC32::D_PERRIN | Thu Oct 24 1996 16:07 | 3 | ||