| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Hi
Just a sanity check: am I correct that HubWatch does not provide the
functionality to reload/reset a DEChub900, and that the OBM port must
be used to do this?
tl
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2791.1 | Setup-OBM | MXOC00::CSILVA | Tue Sep 26 1995 01:26 | 15 | |
Before anything else:
Do you agree that the same functionality you have managing the
900 in-band is what you have for remote management via the out-of-band
port (the DB9 connector) using HubWatch in both cases?.
And also when you have to reset a DEChub900 you normally do it via
the Setup Port (the MJ8 or RJ45 connector, whatever you call it)?
The Setup Port also can be used to initiate a load of the firmware
image instead of HubLoader. You initiate the load via the OBM port
when the image gets corrupted via a BOOTP request made by
the 900 through that port.
| |||||
| 2791.2 | SSSAXP::LEMONS | And we thank you for your support. | Tue Sep 26 1995 01:47 | 7 | |
Yep, I agree. It just hadn't occurred to me until tonight that I want
remote access to the Setup port functionality. Said another way,
walking to the next building to type in a reset command is not my idea
of fun. I wish HUBwatch had something that would allow this . . . .
tl
| |||||
| 2791.3 | NETCAD::DOODY | Michael Doody | Tue Sep 26 1995 12:06 | 4 | |
Are you using Hubwatch v4.1 ? It has the function you need...
md
| |||||