[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2767.0. "DR90FS/DH90 Redundancy Problem" by GRANPA::DFAUST (Bad Things, man...) Fri Sep 15 1995 22:17

    I am trying to set up a redundant FO link between a DR900FP (in a
    DEChub 900) and some DR90FS (in DEChub 90 and DEChub 900). The
    connections between DH900's installed fine, but I'm having problem with
    the DR90FS in the DH90s. The second port on the DR90FS shuts off (it no
    longer emits any transmit light). I have both ports on the DR90FS set
    up as responder ports, with the DR900FP being set as the master. The
    DR90FS is at the following rev levels: HW=v0, RO=v01.02, SW=v1.1. I
    have the DR90FS in slot eight of the DH90s, which are at Rev B01. This
    same situation exists in three different DH90s, so I'm pretty sure it
    isn't a hardware problem with the DR90FS. Port one of all of the DR90FS
    work fine (the customers backbone is using them today).
    
    Can anyone shed any light on this situation?
    
    Dennis Faust
    NPC, Philadelphia
T.RTitleUserPersonal
Name		DateLines