[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2759.0. "DECagent90 and SLIP-> Factory reset to get back to console ..!!? " by ZUR01::ACKERMANN () Fri Sep 15 1995 07:41

    
    
    Hi,
    
    I have a Problem with DECagent90 V3.0.1.
    When you switch to SLIP Mode: Setup Menu [12] 
    this disables the console operation and switches to SLIP.
    This works fine. But to reestablish console operation you
    have to do a factory Reset! By pressing the Reset Switch on
    the Front Panel during Power up or in Hubwatch with the "Factory"
    button. But in both Cases you lose all the Setup Information
    in the Agent!
    The Manual says that only the switch on the Front Panel have 
    to be pressed to get back to console Operation. B u t  t h i s
    d o n t work!
    
    So whats wrong with the Agent?
    
    Thanks for any Help,
    
    Daniel
T.RTitleUserPersonal
Name		DateLines