[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2727.0. "TopN stops reporting" by RDGENG::GREID (All that is, was and will be...) Fri Sep 08 1995 11:14

    One of my probes here at REO after 48 hours or so stops reporting the 
    TopN index values, and the Probe has to be power cycled to clear this.
    Even stopping/starting the Data Capture makes no difference.
    
    I noticed that the following is being logged to my session :
    
    nqlapi: Unexpected SNMP error 3
    nqlapi: Agent Error: Variable contains bad value -->
    hostTopNHostIndex.7
    qlapi: Agent Error: Variable contains bad value --> hostTopNHostIndex.8
    nqlapi: Unexpected SNMP error 3
    nqlapi: Agent Error: Variable contains bad value -->
    hostTopNHostIndex.8
    nqlapi: Unexpected SNMP error 3
    nqlapi: Agent Error: Variable contains bad value -->
    hostTopNHostIndex.8
    nqlapi: Unexpected SNMP error 3
     
    There a couple of dozen of these over a period of time.
    
    Anyone else experienced this.? Is there a fix ?
    
    Probewatch for Digital Unix is V3.2
    Packet Probe 90 is running V2.4
    
    
    Giles.
T.RTitleUserPersonal
Name		DateLines