[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2722.0. "Suggestion for Terminal Server setup." by NAC::LICAUSE () Thu Sep 07 1995 12:23

    If this has not already been proposed, I would like to suggest that
    the switch to the far left hand side of the terminal server detail 
    window that allows the options of LOCAL, DYNAMIC, NETWORK, NO ACCESS,
    be enhanced by providing a series of characteristics to be set for
    each of these options.
    
    For example, a further popup or other window could be brought up that
    would give all possible settings or a subset for a port and these
    options could be selected using a check box.  Once set, these buttons
    could be used to completely set all options for a particular port.
    
    Today, if you want to setup a port for a printer, for example, the
    switch is set to NETWORK, but this only changes the parameter ACCESS.
    It would be great if a single button click could change all needed
    parameters.
    
    Comments?
    
    Al
T.RTitleUserPersonal
Name		DateLines