[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2653.0. "DEC UNIX vs Windows show differences" by CSC32::RA_HALL () Thu Aug 17 1995 23:51

    	I have a customer that is seeing some differences in Hubwatch between
    the DEC UNIX platform and the DOS Windows platform.
        They are running Hubwatch V4.0 on both and have upgraded the DH900
    and all the modules with the latest DCF kit.
    	The differences are as follows:
    
            In the Environmental summary, the Dos platform shows the fans on
    the DC900MX as yellow. The DEC UNIX platform shows them as red. All other
    modules are normal.
            The Dos platform reports the DH900 firmware to be 4.0.2. The
    DEC UNIX platform reports it as 4.0.0
            The Dos platform reports the DC900MX firmware to be 3.0.1. The
    DEC UNIX platform reports it as 3.0.0. All other modules report no
    differences.
    
    
    Thanks
    Ray Hall
    CSC-CS Network Support

T.R	Title	User	Personal Name	Date	Lines
2653.1	Deja vu	PRSSOS::PEYRACHE	Jean-Yves Peyrache Country Support Group France	`Fri Aug 18 1995 08:30`	19
	>> in the Environmental summary, the Dos platform shows the fans on >> the DC900MX as yellow. The DEC UNIX platform shows them as red. All other >> modules are normal. known problem already reported in several notes here.. engeneering working on it to provide a fix in next Wave of Firmware >> The Dos platform reports the DH900 firmware to be 4.0.2. The >> DEC UNIX platform reports it as 4.0.0 >> The Dos platform reports the DC900MX firmware to be 3.0.1. The >> DEC UNIX platform reports it as 3.0.0. All other modules report no >> differences. don't matter of these differences it's only for manufacturing purpose JYP
2653.2		WOTVAX::stus.olo.dec.com::HATTOS	Don't delete your Windows directory	`Mon Aug 21 1995 11:56`	2
	It may not matter, but from a customer point of view, the same product on 2 platforms, should return the same answers.
2653.3		CSC32::RA_HALL		`Mon Aug 21 1995 13:56`	1
	Could you elaborate on the "manufacturing purpose".
2653.4		NETCAD::DOODY	Michael Doody	`Mon Aug 21 1995 14:03`	5
	There are some extra diagnostics that are run by manufacturing, at the time the product is built. Changes to those diagnostics are not visible to anyone else. -Mike
2653.5	thanks	CSC32::RA_HALL		`Mon Aug 21 1995 14:51`	3
	Thanks. Ray