[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2627.0. "HUB900 MAM V4.0 and traps for PORTswitch?" by SNOFS1::63496::CHIUANDREW () Thu Aug 10 1995 03:43

    1) Would it be possible to set the 'default gateway' on HUB900 MAM via
    SNMP manager (e.g. PNV)?
    
    If yes, then which object should be set ?
    
    2) What kind of traps will be sent from Portswitch 900TP/FP? Do we have
    any TRAP definitions canbe shown to customer?
    
    (I could not find any traps from dec-hub900-erptr-mib-v2-0.txt)
    
    
    thanks in advance for help!
    Andrew Chiu - Network Services Sydney

T.R	Title	User	Personal Name	Date	Lines
2627.1	not via SNMP	TOOK::MILLBRANDT	answer mam	`Thu Aug 10 1995 14:32`	14
	> 1) Would it be possible to set the 'default gateway' on HUB900 MAM via > SNMP manager (e.g. PNV)? > > If yes, then which object should be set ? Regarding question 1, wave 3 versions of the MAM and 900 linecards support setting a default gateway address, but only via the local setup console. No IP address information is currently settable via SNMP. The intent is to prevent security problems - remote intrusion changing an IP address. IP changes must be made locally. Dotsie
2627.2	trap info	NETCAD::CURRIER		`Thu Aug 10 1995 16:26`	2
	see note 2575