| Jan,
>About ones a day, Hubwatch for windows 4.0.1 say'es
>"No agent specified for module "
>The errorlog say'es
>" snmp request has no agent defined, invalid request"
This may be a problem we've already fixed for the next minor release of the
DEChub 900 (MAM) f/w (4.X.0 (where X > 0)). This bug is in 4.0.2 of the MAM
f/w.
The problem occurs when a module, acting as IP Server, goes to sleep, and
there are no other IPS/OBM addresses defined in the MAM. A module can go
to sleep on an upgrade, a reset, or a crash. This causes the MAM to lose
management connectivity.
If you upgraded or reset your IPS module recently, and no other IP addresses
are defined in MAM. You only need to do a "Reset to Current Settings" on the
MAM.
Otherwise, you may want to check the error log of your IPS module. Also,
reset the MAM as described above. Your module may have problems.
Hope this helps,
Chip
[Posted by WWW Notes gateway]
|
| Chip,
>This may be a problem we've already fixed for the next minor release of
>the DEChub 900 (MAM) f/w (4.X.0 (where X > 0)). This bug is in 4.0.2 of
>the MAM f/w.
When will f/w 4.1.0 be available ?
SARRAZ> dir netcad::proj$722:[onehub.release.firmware.v4_1.dos]
%DIRECT-W-NOFILES, no files found
Cheers,
Pedro
|
| We don't give dates here. Please ask the product manager.
Also, he didn't say there would be a version v4.1.0, it is too early
to predict the version number.
>>SARRAZ> dir netcad::proj$722:[onehub.release.firmware.v4_1.dos]
>>%DIRECT-W-NOFILES, no files found
Note that the V4_1 here refers to the version of the consolidated kit,
which may be a different version number than any firmware contained within.
-Mike
|