Conference netcad::hub_mgnt

2531.0. "Community name DH900" by WELCLU::GAMET () Mon Jul 17 1995 16:07

    I have a problem with 2 DEChub 900,s In the first hub called SVH3_900
    when looking at the DECswich900EF using manage current I see a comunity
    name that is not set  on any of the modules in the Backplan or the
    agent. has anybody seen this before. This hubs configuration is as
    follows :-
    (I) Slots: 1       2       3       4       5       6       7       8       
    16:32:42 1995
     (I) Cards: Empty   DETMM   DETMM   DETMM   Empty   Empty   Empty 
    
    Hub900MultiSwitch,DEChub 900 MultiSwitch,HW=F,RO=V1.1.6,SW=V3.1.0   9
    DECswitch 900EF, 6-Ethernet/FDDI Bridge, HW=v1/2,RO=v0.4,SW=v1.4.0  8
    DECrepeater 900TM , 32 Port TP Ethernet Rptr SNMP,
    HW=v3,RO=v1,SW=V1.1.0  4
    DECrepeater 900TM , 32 Port TP Ethernet Rptr SNMP,
    HW=v3,RO=v1,SW=V1.1.0  3
    DECrepeater 900TM , 32 Port TP Ethernet Rptr SNMP,
    HW=v3,RO=v1,SW=V1.1.0  2
    
    Hubwatch is v 3.1.0 on OSF/1 V3.0
    
    In the second hub SVH6_900 I can not use the community name set in the
    agent to manage any of the modules in the hub except a PEswitch 900TX
    if I use the community public then I can see all the modules. This hubs
    configuration is  as follows:-
    
     (I) Slots: 1       2       3       4       5       6       7       8       
    16:52:22 1995
     (I) Cards: DETMM   DETMM   DECMR   DECMR   DECMR   DSRVZ   PE200  
    US9EF   
    16:52:22 1995
    
    Hub900MultiSwitch,DEChub 900 MultiSwitch,HW=F,RO=V1.1.6,SW=V3.1.0   9
    DECswitch 900EF, 6-Ethernet/FDDI Bridge, HW=v1/2,RO=v0.4,SW=v1.4.0   8
    PEswitch 900TX, 6-Ethernet/FDDI Switch, HW=v1/2,RO=v0.4,SW=v1.0.2    7
    Network Access SW V1.3 for DS900TM  BL80-27  ROM V5.0-0  LAT V5.1  LOAD
    IMAGE: C  6
    DECrepeater 90C,6 port TW Ethernet Rptr,HW=0   5
    DECrepeater 90C,6 port TW Ethernet Rptr,HW=0   4
    DECrepeater 90C,6 port TW Ethernet Rptr,HW=0   3
    DECrepeater 900TM , 32 Port TP Ethernet Rptr SNMP,
    HW=v3,RO=v1,SW=V1.1.0   2
    DECrepeater 900TM , 32 Port TP Ethernet Rptr SNMP,
    HW=v3,RO=v1,SW=V1.1.0   1
    
    These hubs have been previously working ok. But when a PE swich was
    added to SVH6_900 we started seeing the problem.