[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2401.0. "Portswitch Grouping - Standalone" by CHOWDA::FAHEY (Are we having 'FUN' yet?) Tue Jun 20 1995 17:10

    Is there a way to 'group' ports on the Portswitch 900 family
    in a standalone configuration?
    
    I have a customer who wants to 'group' the 10baseTs into 4 seperate
    Ethernets (to be linked by a DECswitch 900EF Standalone).
    
    I gave a portswitch 900FP it's own IP address but I could not find a
    way to do port grouping when running hubwatch directly against the
    module.
    
    It comes down to packaging (8, 90TS vs 2, 900TP)
    
    Thanks
    Jim
T.RTitleUserPersonal
Name		DateLines
2401.1SureNETCAD::HERTZBERGHistory: Love it or Leave it!Tue Jun 20 1995 17:222
    Sure, this should work.  Absolutely.  You'll need to wire the groups to
    the DECswitch via front-panel ports, yes?
2401.2NETCAD::DRAGONTue Jun 20 1995 17:359
    
    Jim,
    
    	The Repeater Summary View Configuration Section Port Switching Icon
        (lower middle icon) will let you group the ports.
    
    Regards,
    Bob
2401.3Thanks!!CHOWDA::FAHEYAre we having 'FUN' yet?Tue Jun 20 1995 17:473
    thanks for the incredibly fast reply....
    
    Jim