[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2376.0. "FDDI traps for DS900EF?" by WARABI::CHIUANDREW () Tue Jun 13 1995 02:14

    Hi,
    
    Customer would like to know the TRAPS sent from DS900EF in regarding to
    the FDDI interface's events?
    
    (PS I look at RFC1285, but there is NOT traps defined) and customer
    will run their FDDI ring using DS900EF, and sent traps to Polycenter
    Netview station when something happen to their FDDI network (e.g. dual
    home link is switched to M-A, A-B link is down, etc..)
    
    
    
    Thanks in advance for help
    
    Andrew Chiu - Network services sydney
T.RTitleUserPersonal
Name		DateLines
2376.1NETCAD::ANILWed Jun 21 1995 16:3712
    First, RFC 1285 is not implemented on the DECswitch 900EF -- instead,
    it implements the latest FDDI MIB RFC 1512, which is designed
    to work with the latest approved ANSI FDDI SMT, sometimes referred
    to as 7.3, but more correctly X3.229 now that it is published.
    (1285 is compatible with an earlier, outdated draft of the SMT - 6.2).
    
    Secondly, no traps are sent specific to FDDI info; however linkUp
    and linkDown are sent on both FDDI and Ethernets when the interface
    comes up or goes down.  These are standard SNMP traps, not specific
    to any particular datalink technology.
    
    Anil