[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2358.0. "DS900TM via IMB Problem" by FRSIT::MAYER () Thu Jun 08 1995 13:21

Crossposted to Terminalserver Conference

Hi,

we have problems using an DS900TM in a DEChub 900 via an IMB Channel.

Configuration:

DECswitch 900EF 	port 3 connected to Thinwire channel
			port 4 connected to IMB channel
DECrepeater 900TM	connected to IMB channel

After Powerup the DS900 is connected to Thinwire channel. Every thing is ok.
Then I move leg 1+2 from the DS900 to the IMB where the DR900 and DS900EF is
connected. Intermittend I didn't get a connection to the network. The led (#)
goes off after about 10 seconds and the server counter doesn't increase.
Seems that there is no network connection.
There is no errormessage in the DEChub Event logger or Error logger.

We are using DEChub FW 3.1.0
DS900 TM NAS 1.5

Any idea ?

Regards
Juergen Mayer
T.RTitleUserPersonal
Name		DateLines