[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2323.0. "Roamabout Qns" by STROP::LAYLAND (Iligitami nil Carborundum) Tue May 30 1995 16:49

The following questions have been posed. Are there any simple answers ?

In question 1, I believe that they are trying to connect two lan's together.
Is this allowed ?  Qns 2,3 & 4 seem to be concerned with FCC compliance. 



1. What is required to provid a point to point wirless connection, they wish to
connect to buildings together. Can we use two of the hub's to do this the
presentation we had in France showed two pc's connected together not two hub's.

2. Is there any case histories for Health Care environments, they are extremely
worried that the wirless connection could cause problems with patient equipment
both life support and monitoring.

3. The proposes pilot site is very close to an Airport is there any likly
interference problems.

4. What levels of security are avalible this link may transmitt patient data
they are conserned with others being able to listen in and possible corruption
form outside sources.


What I require is a pointer to a detailed spec, or detailed installation notes.


Regards John
T.RTitleUserPersonal
Name
DateLines
2323.1Try the NOTED::WIRELESS_LANS notes conf....NETCAD::SKABOExpect Nothing U never disappointedTue May 30 1995 20:167
    
    This would be best asked in the RoamAbout Notes file 
    
    	RoamAbout products             NOTED::WIRELESS_LANS 
    
    
    Press keypad #7 to add NOTED::WIRELESS_LANS to your notebook....
2323.2STROP::LAYLANDIligitami nil CarborundumWed May 31 1995 08:024
Thanks for the pointer


John