[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2308.0. "DECrepeater 90C+Agent=no stations?" by PTOJJD::DANZAK () Tue May 23 1995 15:01

    A customer has a DEChub 90 with 90C repeaters and a 90FL repeater.They
    added a DECagenet at the latest firmware (2.1.3) and when they go into
    HUBwatch can not see connected stations on the ports. 
    
    In a hub like the above with a DECbridge 90 instead of a 90FL the
    connected stations works fine.
    
    Any thoughts about this?  I understand that the agent polls (as per
    rogerdoger) and that the repeater only remembers the last address that
    it saw...but....????  What time interval does this happen etc..?  Could
    somebody outline the general timeframes?
    
    Thanks,
    j
T.RTitleUserPersonal
Name		DateLines