| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 2187.1 | Not supported | STEVEV::VINGERHOET | | Wed Apr 12 1995 16:46 | 5 |
| This version is old and not supported. Please contact Jack Forrest if
you need a new version.
Steve Vingerhoet
HUBwatch/Windows
|
| 2187.2 | New version arriving next week | HERON::codger.vbo.dec.com::HEMMINGS | Lanterne Rouge | Thu Apr 13 1995 06:50 | 2 |
| Thanks, we are getting a new version next week from Ed Buzzell - I shall be
interested to see if this fixes it.
|
| 2187.3 | X4.0.14 OK | HERON::codger.vbo.dec.com::HEMMINGS | Lanterne Rouge | Thu Apr 13 1995 15:20 | 3 |
| Great! I just got X4.0.14 and it's installed fine and working.
|
| 2187.4 | Install/Configure V4.0.20 on a LABTOP | GENIE::FUCHS | | Mon May 15 1995 13:55 | 22 |
| Hi,
I have some Problems to run HUBwatch on my Labtop.
HW
DECPC 325SE Color
12 MB Memory
1 x DEPCM-BA (Ethernet PC Card)
SW
Windows 3.1
HUBwatch V X4.0.20
I could install HUBwatch without any Problems but i cant start
HUBwatch.
Symptom:
I Click on the HUBwatch Icon, i see some Disk acesses and thats it.
The Path to load HUBwatch locks ok to me.
Any sugestions?
Regards Fred Fuchs
|
| 2187.5 | Provide more detail of exactly what happens | NETCAD::WAGNERCOFFIL | | Mon May 15 1995 14:10 | 4 |
| Need more detail. What exactly happens?? Does HUBwatch come up
at all? Does it hang? Does it never come up?? Do you get an error
message??
Barb
|
| 2187.6 | What TCP/IP stack are you using?? | NETCAD::WAGNERCOFFIL | | Mon May 15 1995 14:13 | 4 |
| What TCP/IP stack are you using?? Is the TCP/IP stack started
before you start WIndows 3.1. Try PING before you run HUBwatch
from a DOS prompt/box.
Barb
|
| 2187.7 | Not starting and no error message | GENIE::FUCHS | | Mon May 15 1995 15:00 | 14 |
| Hi,
After Installing HUBwatch i get the Window with the 3 Icons HUBwatch,
HUBloader and TFTP_server. I click on the HUBwatch Icon and the litle
clock apears for a few seconds and then i get the arrow back again.
No it doesent hang it just does not start up at all, and no i dont get
an error message.
For Reply 6
Yes i can Ping
Help is very welcome
Regards Fred
|
| 2187.8 | Require more info, PLEASE answer all questions | NETCAD::WAGNERCOFFIL | | Mon May 15 1995 18:56 | 13 |
| What TCP/IP stack are you using?
Click just once on the HUBwatch icon to select it and select File
menu Properties... option. Does the command line match the directory
where you installed?
Instead of using the ICON, double click on the HUBWATCH.EXE thru
the File Manager. Do you get the same results?
Does the HUBWATCH.EXE exist in this directory?
Do the HUBwatch environment variables match this directory?
Type SET at the DOS prompt to check.
Barb
|
| 2187.9 | Using HUBwatch provided TCP/IP Stack | GENIE::FUCHS | | Tue May 16 1995 07:48 | 9 |
| I am using the TCP/IP Stack whitch comes with HUBwatch.
This Stack seams to work. I can do pings and sethosts (telnet).
To me it looks more like some Windows/HUBwatch and LABTOP relatet
Problem.
To verify my HUBwatch Kit i installed HUBwatch on an old DECpc 325 with 8
MB Mem, DEPCA Card and it just worked fine.
Regards fred
|
| 2187.10 | V4.0-20 is working with WFW 3.11 | GENIE::FUCHS | | Thu May 18 1995 16:15 | 12 |
| Hi,
Now, it is working.
I cleaned my Labtop completly off just keeping DOS on it.
I installed Windows for Workgroups V 3.11 and then i installed
and configured HUBwatch V4.0-20 with out any problems.
Regards Fred
|