| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
A customer has a HUB 900 with a BRIDGE 900MX, four REPEATERS 90TL,one
REPEATER 90FL and four POWER SUPPLIES.
The HUB is losing the IP address after a kind of reset. I've already
replaced the agent module, but it happens again.
After configuration the hub works good.
The dump information is :
4: Ps problem ! ac_ok, dc_bad , 48v_ok
Can anyone help me ?
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2150.1 | Probably a power supply problem.... | CGOOA::PITULEY | Ain't technology wonderful? | Tue Mar 28 1995 21:35 | 13 |
>> 4: Ps problem ! ac_ok, dc_bad , 48v_ok
This looks an *awful* lot like a power supply problem....combined
with your statement that the loss of the IP address happens after a
"kind of reset". It seems to me that the power supply is failing in
such a way as to cause the NVRAM in the MAM to reset to factory
defaults.....
Brian Pituley
NPC, Calgary
| |||||
| 2150.2 | Check F/W version ... | DECPRG::PRNET::Pilar | Wed Mar 29 1995 13:46 | 4 | |
I had this problem - loosing of IP address - with old firmware (V2.1 I guess) Upgrade to V3.1 (and appropriate F/W in modules) was solution. Jarry | |||||
| 2150.3 | HUB 900 LOOSING IP ADDRESS | VAXRIO::ASCENCAO | Thu Mar 30 1995 13:39 | 7 | |