| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2144.1 | from a previous note | CGOS01::DMARLOWE | Wow! Reality, what a concept! | Mon Mar 27 1995 21:47 | 9 |
Check 2075, especially 2075.5. I was hoping someone would make
additional comments but not yet so far. The first release, so I've
been told, is strictly software switching/routing so unless something
happens it will be 20Kpps. The next release will be a recode and
switching will use the hardware assist and will be around 40Kpps.
However, I can be corrected.
dave
| |||||
| 2144.2 | Please more Information | FRSIT::MAYER | Tue Mar 28 1995 14:43 | 17 | |
More Information required!!! Our customer plans to change his FDDI Backbone to a multiple (4) GIGAswitch backbone, distributed over two different sites. Direct to the GIGAswitch he connect his VMS(LAVC) or UNIX Server-Systems. The clients and usersystems are connected via Ethernet to DEChub 900 and from DEChub 900 to the GIGAswitch's via DECswitch 900EF. Now the customer requires to change from a total transparent bridged network to route IP traffic and bridge all other protocols. The problem/Question ? I doesn't get any information about the performance/latency for the DECswitch 900EF routing software comming this summer. Will the "DECrouter 900" be able to handle this traffic like the DECswitch 900 ? Is the "DECrouter 900" able to be a Backbonerouter ? Regards Juergen | |||||
| 2144.3 | Contact Product Manager for specific information.... | NETCAD::BATTERSBY | Tue Mar 28 1995 17:54 | 4 | |
Juergen - you'll have to contact Hakim Dhilla (DELNI::DHILLA),
for more specifics. He's the product manager.
Bob
| |||||