| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
I read the sales update article and I believe the following won't work, but it doesn't hurt to ask anyway ... My customer has a 900EE with a DEChub ONE. They use it to bridge 4 separate Ethernet segments. Now they need to bridge their FDDI net as well. Instead of buying a DECbridge 600 or a 900EF, can they replace the DEChub ONE with the DEChub ONE-MX, and use the FDDI port on the DEChub ONE-MX? What other alternatives are there? Can they trade in the 900EE for a 900EF? Thanks Tim
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2080.1 | high-end docking station has no FDDI "engine" | NETCAD::MOWER | Wed Mar 08 1995 12:56 | 14 | |
> ...I believe the following won't work, but it doesn't hurt to ask anyway ...
>
> My customer has a 900EE with a DEChub ONE. They use it to bridge 4
> separate Ethernet segments. Now they need to bridge their FDDI net
> as well. Instead of buying a DECbridge 600 or a 900EF, can they
> replace the DEChub ONE with the DEChub ONE-MX, and use the FDDI
> port on the DEChub ONE-MX?
Correct - it won't work. The high-end docking station merely provides
a place to connect up to 2 FDDI mod-pmds, it does not provide the actual
FDDI "engine".
Carl Mower.
| |||||
| 2080.2 | DECswitch 900EF + DEChub ONE-MX = FDDI front & back.... | NETCAD::BATTERSBY | Wed Mar 08 1995 14:08 | 6 | |
RE: .0 The DECswitch 900EE does not have an FDDI engine. It's
an Ethernet-only incarnation of the DECswitch 900EF. So yes, if
your customer wants to now pass FDDI traffic through a DECswitch,
they will have to use a DECswitch 900EF for this.
Bob
| |||||