[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

2073.0. "Fault isolation & Traffic Monitoring" by DPDMAI::DAVIES (Mark, SCA Area Network Consultant) Tue Mar 07 1995 12:34

    The HUBwatch V4.0 Sales Update states:
    
    "With the firmware upgrade included in HUBwatch V4.0, intelligent
    agents in the DEChub 900 MultiSwitch and each repeater can provide
    module and port level alarms for fault isolation and traffic
    monitoring."
    
    Can we get a more definitive explanation of this new capability.
    
    1. Does "provide alarms" mean "send and SNMP trap"?
    
    2. What faults are supported?
    
    3. On traffic monitoring, does this mean thresholds can be set per module
       or port and an SNMP trap will be sent if the threshold is met?
    
    Thanks,
    
    Mark

T.R Title User Personal
Name Date Lines

2073.1 hint: RMON Alarms and Events NAC::FORREST Mon Mar 13 1995 22:20 10

T.R	Title	User	Personal Name	Date	Lines
2073.1	hint: RMON Alarms and Events	NAC::FORREST		`Mon Mar 13 1995 22:20`	10
	Mark, see the replies to 2071 for info on RMON Alarms and Events, which is the basis for this new capability. Note that this does not apply to the DECrepeaters 90C, T, FA, & FL, which do not have SNMP agents. This may be a bit misleading, because there will not be any support for setting Thresholds in HUBwatch V4.0. A later version will have screens for setting Thresholds. In the interim, you can use a generic SNMP manager that supports the RMON MIB; you will also find a paper copy of the Repeater/DEChub MIBs handy. (I didn't say it would be easy...)

    Mark, see the replies to 2071 for info on RMON Alarms and Events, which
    is the basis for this new capability. Note that this does not apply to
    the DECrepeaters 90C, T, FA, & FL, which do not have SNMP agents.
    
    This may be a bit misleading, because there will not be any support for
    setting Thresholds in HUBwatch V4.0. A later version will have screens
    for setting Thresholds. In the interim, you can use a generic SNMP
    manager that supports the RMON MIB; you will also find a paper copy of
    the Repeater/DEChub MIBs handy. (I didn't say it would be easy...)