[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2035.0. "HUBwatch causing "GENERAL OR SYSTEM ERRORS"" by CGOOA::PITULEY (Ain't technology wonderful?) Tue Feb 21 1995 15:46

    While doing the installation and configuration of HUBwatch for Windows
    3.1 on a customer's site, I have been running into a problem with
    little error message windows popping and saying "GENERAL OR SYSTEM
    ERROR".  It starts to occur after working with the application for 10
    to 15 minutes......this is fairly intense activity....setting up new
    agents, community name, switching views, etc.  
    
    It seems to me that this error is caused by lack of system resources. 
    I am wondering if anyone else has seen this type of behavior with
    HUBwatch for Windows or if this is a known problem with HUBwatch.  The PC 
    is a 486D/xx with 16Mb of RAM so it should be capable of running HUBwatch.
    
    Brian Pituley
    NPC, Calgary
T.RTitleUserPersonal
Name		DateLines