[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

2021.0. "DECswitch 900EE questions" by TRN02::TAGINI () Fri Feb 17 1995 07:12

    I've a question regarding DECswitch 900 EE
    
    If I use it in standalone mode ( with docking station ) all the ports
    on the front panel ( 2 aui and 4 10baseT ) are still available ? 
    so I can connect 7 ethernet segment ?
    
    If not which port on the front panel I can NOT use ( AUI or 10baseT ) ?
    
    Thanking for help
    Regards
    Massimo
T.RTitleUserPersonal
Name		DateLines
2021.1fixed to 6CLPR01::PEYRACHEJean-Yves Peyrache Country Support Group FranceFri Feb 17 1995 09:336
    
      always 6 , but you move one 10baseT to AUI of docking stations using
      console menu
    
      jean-yves
2021.2port 3 goneCONSLT::BUZZELLFri Feb 17 1995 11:376
    
    
         When you shift it to the AUI you CANNOT then connect anything
    to port number 3 on the front bezel
2021.3Al 6 ports out front (default) port 3 optional to back..NETCAD::BATTERSBYFri Feb 17 1995 12:016
    Notes .1 & .2 both describe the EE correctly. In default config,
    all 6 ports are available out the front. Using the standalone
    menu, if you connect port 3 to the rear docking station AUI port,
    you cannot use port 3 out the front at the same time.
    
    Bob