[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1925.0. "900gm cable documentation" by CHEFS::DAVIDSONS () Tue Jan 24 1995 10:12

Can anyone give some help on the available cables for use with the 900GM
repeater. Specifcally telco to AUI.
I need a reference of where the information is held.
T.RTitleUserPersonal
Name		DateLines
1925.1telco to rj45PRSSOS::PEYRACHEJean-Yves Peyrache Country Support Group FranceTue Jan 24 1995 11:518

 BN26U-03 is a trick

 50 pin Telco to 12 Rj45


  jean-yves
1925.2NETCAD::HERTZBERGHistory: Love it or Leave it!Tue Jan 24 1995 13:0010
    I don't understand what you mean by "Telco to AUI."
    
    The only cable we made specially for the 900GM was the octopus cable
    mentioned in the previous reply.  The 900GM's Telco connectors are
    industry-standard 12-port twisted pair pinout.
    
    The 900GM's front-panel AUI connector is industry-standard AUI.  Plug
    in a MAU or a cable, as you prefer.
    
    							Marc
1925.3Do I need a patch panel?NETRIX::"porambo@maasup.bjo.dec.com"Bob PoramboFri Mar 21 1997 19:0614
Hello,

  I am attempting to bypass the customer's wiring to/from a DECrepeater
900GM. I need the BN26U cable. Do I need a patch panel in addition to
this cable, or, can I connect a TP cable from a node directly into the
end of the BN26U?

  I seen references to the H3107-N, H3117-NA/NB/NC, and H3117-MA. Which
of these, if any, do I need?

Thanks,

Bob
[Posted by WWW Notes gateway]