[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1878.0. "VMS Hubwatch displays incorrect info?" by POBOX::ELARSON () Thu Jan 12 1995 15:28

    I have a customer with the following Hubwatch VMS display problem...
    
    900MS  V3.1
    900EF  V1.4
    900MX  V2.8
    900TM  V1.1
    Hubwatch V3.0.0 running on VAX4000-300 V5.5-2
    
    When looking at the 900EF's port settings (ports 2-7) Hubwatch shows
    these ports as all having the same port # 4.
    
    Under Hubwatch for Windows V3.1 it shows the correct information.
    
    Is there a later version of Hubwatch VMS the customer should be running,
    or a potential problem with HW/VMS?
    
    Any comments or suggestions are appreciated.  Thanks in advance.
    
    Ed

T.R	Title	User	Personal Name	Date	Lines
1878.1	HUBwatch for OpenVMS VAX V3.1 ...	ROGER::GAUDET	Because the Earth is 2/3 water	`Thu Jan 12 1995 16:04`	3
	...has been available since October '94. ...Roger...
1878.2	V3.1 all platform	CLPR01::PEYRACHE	Jean-Yves Peyrache Country Support Group France	`Thu Jan 12 1995 19:18`	4
	HUBwatch V3.1 for Open-vms (VAX) correct that .. jean-yves