| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
synopsis:
does anyone have information on how to change the
token rotation value on the DECbridge 900MX?
description:
Site (a bank) has all FDDI user systems on NI cards.
They replaced a 620 with the 900MX, and it appears their
response was better with the 620 at 12ms than the 900MX
at its default 8ms.
The ring performed better with the 620 at 12ms than when
the 620 was running at 8ms (they manipulated the token
rotation value with MCC). They'd like to try the 12ms
value on the 900MX.
HUBWATCH is not available at the site.
Thank you,
V. Romano
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1842.1 | To set the T_Req | NETCAD::SLAWRENCE | Thu Jan 05 1995 15:29 | 9 | |
SNMP Set fddimibPATHMaxTReq[1.1] (1.3.6.1.2.1.10.15.73.4.2.1.5.1.1)
To 12000000
That object is defined in rfc1512.mib, FDDI-SMT73-MIB - the FDDI MIB.
Note that this will change the value _bid_ by the switch - the value
used by the ring will be the lowest bid by any station.
| |||||