[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1659.0. "DMHUB: no reprogramming of UUT in slot 1 possible" by JGODCL::CLEEUW () Fri Nov 04 1994 07:17

    During the development of a repair packet for the DETTM we ran itno a
    braindead DETTM. (caused by programming this unit via it's MAU while
    inserted in a DMHUB (no othermodules in the DMHUB)
    Via the other ports reprogramming worked ok.
    The DTTM only responded while powering up but could not receive its
    image (probably because it's IP addrss could not be identified).
    We eventually cured this problem and got the DETTM up and running.
    however we could not reprogram this unit not a DEFAR and a DEFBA via
    slot1 of the DMHUB.
    Question: is there a restriction on port 1 for doing this  ?
    I thought that it would not matter in what slot we put the UUT for
    reprogramming but it seems it does.
    Cees

T.R	Title	User	Personal Name	Date	Lines