| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Please let me know what the 12V, 5V, and total power consumptions are
for the PEswitch 900TX module.
Thanks
Mark
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1658.1 | 8.0; 0.7; 50.5 | CERN::JRS | John SHADE - 'Attila the Nun' | Fri Nov 04 1994 08:27 | 12 |
You obviously didn't try very hard to see if your question was redundundant.
Note 1424.* were the ones to read - as well as note 4.1
Option Power Modules Per Hub (*)
--------------- ----- -------------------
PEswitch 900TX 50.5W 8
Component_______________+5_V______+15_V____Tot. W.___
DESBF(PE200)PEswitch 8.0 0.7 50.5
6 port Ethernet/FDDI
-John
| |||||
| 1658.2 | The 12v requirements are included in 15v power total | NETCAD::BATTERSBY | Fri Nov 04 1994 11:52 | 15 | |
An additional qualifier is needed on the request for the
12v requirement. That is, that the 12v power is derived from the
15v source. It is listed separately in the installation guide
specifications for the PEswitch 900TX, but is included in the
15v power total. All the other numbers are correct.
[from the PEswitch 900TX guide]
Power 50.5w
8.0a 5vdc
0.1a 12vdc
0.7a 15vdc
Bob
| |||||