| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1520.1 | add keywords kits required......... | CLPR01::PEYRACHE | Jean-Yves Peyrache Country Support Group France | Tue Oct 04 1994 13:21 | 4 |
| V2.0, in DCF (distributed consolidated Firmware) kit V1.1
pointer in notes 1368
Jean-Yves
|
| 1520.2 | Please search notes before writing a new one! | ROGER::GAUDET | Because the Earth is 2/3 water | Tue Oct 04 1994 14:40 | 3 |
| You're close, Jean-Yves. It's V2.1.
RE: .0: Check out note 1368.
|
| 1520.3 | hum...are you sure.. | CLPR01::PEYRACHE | Jean-Yves Peyrache Country Support Group France | Tue Oct 04 1994 16:27 | 20 |
| re:-1
sorry Roger,
hereunder a extract of NS3210.TXT keep in DFC distribution
see Firmware Version , may be a digit lost during the completion of kit...
thanks for your feedback
Jean-Yves
DECpacketprobe 90 Release Notes Firmware Version 2.0
AA-QBXEA-TE August 1994
These Release Notes describe how to quickly set up and configure your
DECpacketprobe for use with your PROBEwatch application.
|
| 1520.4 | Docs != code | ROGER::GAUDET | Because the Earth is 2/3 water | Tue Oct 04 1994 17:13 | 5 |
| You are correct, Jean-Yves. The release notes were written for V2.0, but the
firmware is actually V2.1. Apparently there were no "notable" changes from
V2.0 to V2.1 of the firmware.
...Roger...
|
| 1520.5 | fix for SNMP register in MCC? | WOTVAX::64021::Tim_Banks | Network Mercenary | Wed Oct 05 1994 11:04 | 8 |
| sorry, I should have searched on kits not firmware,
however does this version 2.1 of PROBE firmware fix the issues
mentioned in this conference about inability to register the PROBE in DECmcc?
Thanks
Tim
|
| 1520.6 | yes | MFRNW1::SCHUSTER | Karl Schuster @UFC OMS/Network Services Munich | Wed Oct 05 1994 11:45 | 7 |
| Yes, it registers with MCC. I have tried it out.
I can also read the RMON data with MCC.
Read the release notes before! You have to change some default
parameters on the probe before.
Karl
|
| 1520.7 | good one! | WOTVAX::64021::Tim_Banks | Network Mercenary | Wed Oct 05 1994 14:34 | 7 |
| Karl,
Thanks for that, the release notes suggest that the problem is fixed, but it
is nice to know that someone has succesfully tried it out.
Regards
Tim
|