[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1451.0. "Problem on HubWatch for Window V3.1 ? !!! ?" by DV780::MATSUSHITA (JA3QVP) Tue Sep 20 1994 14:58

    Hi,
    
    I copied Hubwatch for window V3.1 from NAC:: directory. 
    I found that this version do have some problems. The following is our
    configuration:
    
        Compaq Deskpro 66m with EISA configuration
        DEC EtherWORK 3 TURBO (205) EISA configuration
        MSDOS V6.2
        MSWindow V3.1
    
    	DECHub 900 MS
        DECagent 90 (Slot 8)
    
    I can ping DECagent 90 from this PC. But if I use Hubwatch program to
    connect to DECagent 90, I got "No response from the agent" message.
    Without changing the configuration on DECHub 900 and DECagent 90, I
    installed V2.0 of Hubwatch for window.  It does work. I can connect to
    the DECagent 90.
    
    Do I have to do something different for V3.1?
    
    
    Nobuo

T.R	Title	User	Personal Name	Date	Lines
1451.1	Things to check for	STEVEV::VINGERHOET		`Tue Sep 20 1994 17:04`	13
	Here are a few things to check for: When you installed X3.1 did you update your icon to point to the new image? Do the variables 'HUBWATCH_LIBRARY' and 'HUBWATCH_SYSTEM' in your autoexec.bat point to the new image directories? If you are trying to run under OpenView, there is a possibility of running out of sockets. You can increase the number of sockets by modifying the parameter 'UDPMaxSock' in the pwtcp.ini file. If you increase it to 10, that should probably do the trick. Steve
1451.2	Not update !	DV780::MATSUSHITA	JA3QVP	`Tue Sep 20 1994 17:15`	9
	re: .1 I did not update from v2.0 to v.3.1. I installed it. >>Do the variables 'HUBWATCH_LIBRARY' and 'HUBWATCH_SYSTEM' in your >>autoexec.bat point to the new image directories? Yes
1451.3	thank you for your help	DV780::MATSUSHITA	JA3QVP	`Tue Sep 20 1994 21:47`	6
	I found a problem. NOw it is working. Thank you for people who reply this note and who send me mail. thank you nobuo
1451.4	same problem	VNABRW::SCHMOELZER_R		`Wed Sep 21 1994 17:33`	6
	Hi all, Can you forward this mail to me, I've the same problem. regards Robert
1451.5	Me too, please...!!!!	DECPRG::PAVLUP		`Thu Sep 22 1994 09:28`	10
	Me too !!!!! Please, could you either describe the problem solution or send me a mail. Thanks a lot. Petr. (Petr Pavlu @CHK) (DECPRG::PAVLUP)