[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1378.0. "PEswitch 900TX - IMPORTANT Configuration info !" by NAC::ALLEN () Tue Sep 06 1994 12:08

    NOTE: there is NO front panel FDDI connection on the PEswitch 900TX -
    until FDDI TREE connections are supported in the DEChub backplane, it is
    necessary to bring FDDI INTO the DEChub backplane via a DECbridge 900MX/ 
    DECswitch 900EF or a DECconcentrator 900MX and OUT of the DEChub 
    backplane via a DECbridge 900MX or a DECconcentrator 900MX if a 
    connection to an external FDDI network is desired - in other words, TWO 
    DECbridge or DECconcentrator modules are needed for external connections 
    to a dual ring.  
    
    When there is firmware support for FDDI TREES in the DEChub back-plane 
    in the future, only ONE DECswitch 900EF or DECconcentrator will be
    required for tree configurations)
    
    NOTE: Careful evaluation of the power requirements of the modules in
    a full DEChub configuration should be done when using one or more
    DECswitch 900EFs since these devices consume more power than an average
    module

T.R	Title	User	Personal Name	Date	Lines
1378.1	Does this mean that you need one one 900mx if you configure for SAS?	BRAT::PEREIRA		`Mon Sep 19 1994 15:33`	6
	is this a problem when you are configuring the hub with SAS connections? Joe pereira