[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1273.0. "DECrepeater900FP & DECbridge900MX config problems" by BOSJHL::CHIUVE () Thu Aug 04 1994 14:20

    I am currently installing 3 DEChub900's each with 4 DECrepeater900TM's
    and one DECrepeater900FP. Two of the Hubs also have a DECbridge900MX.
    I am able to create three stubs for the 900FP, but when I try to create
    a fourth stub the manager gets confused and comes back with one stub
    connected to three segments. I am also having a similar problem with
    the Bridge when I try to switch more than 4 ports from the front panel
    to the backplane. The firmware for the hub is V3.0.0, the 900FP is
    v.1.0.1, and for the bridge is v.1.2.1. I am using a VAXstation 3100
    with 24 meg of memory with Hubwatch for VMS 3.0. Hubwatch also crashes
    when I try to switch between hubs. I have to exit Hubwatch and restart
    it pointing to the one of the other hubs. Any comments or suggestions
    would be appreciated.

T.R	Title	User	Personal Name	Date	Lines
1273.1	Got My Answer	CHIUVE::CHIUVE		`Thu Aug 04 1994 18:17`	2
	I spoke to Bill Seaver this afternoon and he gave me all the answers.
1273.2		TMAWKO::PRESSLEY	pin heads are people too...	`Wed Aug 31 1994 11:16`	1
	If you get time how about sharing the answers with the rest of us.