[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1216.0. "HUBWATCH 2.0/WINDOWS WITH MS-TCP/IP 32bit stack?" by UTOPIE::RINGHOFER_M (keep cool) Wed Jul 13 1994 11:22

Hi,

Has anyone tried HUBWATCH 2.0 for WINDOWS with the MS-TCP/IP 32bit stack?
It should be Winsock 1.1 Compliant.

Customer reported troubles with it.
He is getting an HUBWATCH-ERROR:

STOP --- The socket can not be created 
Error number returned: 10001 (which means remote SNMP agent does not answer).


Any experience or advices?


	regards,

	  Manfred
T.RTitleUserPersonal
Name		DateLines
1216.1HUBwatch may have problems with WFW stackNAC::FORRESTMon Jul 25 1994 17:324
	Is this the Windows for Workgroups stack? If so, it was not supported 
	by Pathworks V5.0. Though they have since made a fix, we have not 
	yet included the fixed code with HUBwatch. Look for it in V3.1.
1216.2IP Stack never started?CXPERT::MCLENDONWed Jul 27 1994 18:404
    Hi,
       I've also seen this exact error if STRTNDIS.BAT is not run; i.e.,
    the IP stack never gets created.  Never overlook the obvious!  Check
    the AUTOEXEC.BAT file and anything it does/doesn't do!