| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
HI,
Our customer is building a dual fiber backbone and the config is shown below:
+-------+
| DEC |
| 2100 |
+-------+
| | Dual Ethernet connection
+-------------+ +-------------+
| |
+-------|-------+ +--------|------+
|R| |R| |A| |A| |R| |R|
+------|9| |9| |G| |G| |9| |9|------+ Redudant
| +----|0| |0| |E| |E| |0| |0|----+ | Fiber
| | +--|F| |T| |N| |N| |T| |F|--+ | | network
| | |+-|L| | | |T| |T| | | |L|-+| | |
| | || | | | | |9| |9| | | | | || | |
| | || | | | | |0| |0| | | | | || | |
| | || +---------------+ +---------------+
| | || Same as LHS
| | ||
| | || +---------------+ +---------------+
| |R| |D| |D| |D| |D| |R|
To +-|9| |S| |S| |S| |S| |9|
4 DEChub |0| |9| |9| |9| |9| |0|
with |F| |0| |0| |0| |0| |F|
same |A| |L| |L| |L| |L| |A|
config | | |+| |+| |+| |+| | |
| | | | | | | | | | | |
+---------------+ +---------------+
: :
: :
There are two redundant fiber network backbones. Each fiber backbone is built
from linking one DECrepeater 90FL to four DECrepeater 90FAs which are installed
on 4 DEChub 90s respectively on 4 different floors. The DEC 2100 systems are
connected to two fiber backbones using two ethernet cards. The customer want
to use HUBwatch for Windows to manage all the hub modules. There are
altogether 10 DEChubs (five hubs for each backbone).
1. We suggest to put one DECagent 90 on the first DEChub of each backbone
for the HUBwatch software. Does one DECagent can manage the five DEChub
and their modules?
2. Do we need a DECbridge 90 on the first DEChub in order to manage all
the DECrepeaters (90FA, 90FL, 90T) ? If needed, do we only need one
DECbirdge 90 for managing the DECrepeaters on the other DEChubs of
same backbone?
3. How many HUBwatch software licenses do we need in this case? Can we
use only one PC with HUBwatch for Windows software for managing all
the DEChubs and their modules on the two backbones?
Feedback would be much appreciated.
Thanks,
Ken
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1196.1 | I can take the first two | ROGER::GAUDET | Because the Earth is 2/3 water | Thu Jul 07 1994 17:40 | 18 |
>> 1. We suggest to put one DECagent 90 on the first DEChub of each backbone >> for the HUBwatch software. Does one DECagent can manage the five DEChub >> and their modules? Mostly. The DECagent cannot manage the remote DECrepeater 90FA modules without a DECbridge 90/90FL in each hub. There is no problem managing the DS90L+ modules in the remote hubs. >> 2. Do we need a DECbridge 90 on the first DEChub in order to manage all >> the DECrepeaters (90FA, 90FL, 90T) ? If needed, do we only need one >> DECbirdge 90 for managing the DECrepeaters on the other DEChubs of >> same backbone? You do not need a DECbridge in the DECagent's hubs to manage the local repeaters (90FL and 90T). You will need a DECbridge in each remote hub in order to manage the 90FA repeaters. ...Roger... | |||||
| 1196.2 | I'll take the third. | SLINK::HOOD | I'd rather be at the Kennebec | Thu Jul 07 1994 18:27 | 7 |
>3. How many HUBwatch software licenses do we need in this case? Can we > use only one PC with HUBwatch for Windows software for managing all > the DEChubs and their modules on the two backbones? You need one HUBwatch license. HUBwatch will manage as many agents as you like, one at a time. As long as you have network connectivity between your pc and your hub, HUBwatch can talk to it. | |||||