[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1092.0. "Upadting firmware in the DH900" by BIGUN::WULFF () Thu Jun 09 1994 09:51

Hi,

I cannot work out what I am doing incorrectly in loading the frimware into the a
DH900.

I have a DEChub900 that has in slot one DECrepeater900 two has DECserver900 five
has the DECrepeater90FA and a DECbridge900 in slot eight. The hub is connected
via the AUI port on the network.

The DECrepeater is supplying the IP services. All modules except the
DECbridge900 are connected to the Thinwire on the backplane. An ip address was
assigned to the hub manager.

From the UCX system we could ping the Hub manager without any trouble etc.

Initiated the load and the load started. It managed to get the hub description
rev levels etc and then another line that I cannot remember what it was (I think
it was putting it into downline load moad). Then timeout! I tried several times
without any success.

This is the command I used with the IP address.

DOWNLOAD LOAD /FORCE=HUBMANV2/MODULE=9 MOM$LOAD:MAMcode

Thanks for any help!

T.R	Title	User	Personal Name	Date	Lines
1092.1		ANTIK::WESTERBERG	Stefan Westerberg DC SN&O Stockholm	`Thu Jun 09 1994 10:45`	5
	Hi, I had some similar experience. It timed out when trying to send the the new firmware. But after reseting the MAM it worked for me. /Stefan
1092.2	Resetting did not work.	BIGUN::WULFF		`Fri Jun 17 1994 04:34`	5
	Resetting did not work. I have given up at the moment.
1092.3	Community?	BIKINI::KRAUSE	CSC Network Management/Hubs	`Wed Jul 27 1994 11:11`	17
	A -very- late reply (I seem to have missed this note): >From the UCX system we could ping the Hub manager without any trouble etc. This means that you have IP connectivity, good. >Initiated the load and the load started. It managed to get the hub description >rev levels etc and then another line that I cannot remember what it was (I think >it was putting it into downline load moad). Then timeout! I tried several times >without any success. It looks like you have set a community other than the default "public" in the HUB manager. In this case you have to specify it: DOWNLOAD LOAD /FORCE=HUBMANV2/MODULE=9 MOM$LOAD:MAMcode /password="cccc" *Robert