[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

968.0. "Module not Supported" by HGOVC::JONASLEUNG () Mon May 09 1994 03:21

    Hi,
    
    I have a DEChub 900 backplane which may always report the 32 ports
    module of repeaters or terminals as unsupported.  However I have
    another backplane which does not have this problem.  Any clues to the
    above problem?  As a result of this, there is no power supplied to any
    of the 32 ports module.
    
    The firmware of the backplane is
                           HR:    F
                          ROM:    V1.1.6
                     FIRMWARE:    V2.2.1
    
    Is there any possibility that the backplane loses its firmware? Or how
    can I load the firmware so as to trace the problem?
    
    Regards,
    Jonas
T.RTitleUserPersonal
Name		DateLines
968.1DELNI::ROUNDSTue May 10 1994 11:259
    Are the modules in the backplane that is behaving properly, the same
    modules that are in the backplane that is misbehaving? 
    
    If the modules work in one backplane and not the other, this means your
    modules are ok. Have you tried the modules in other slots in the
    misbehaving backplane?
    
    Questions are to find out if the problem is with the backplane or
    modules themselves.
968.2Modules are OK!HGOVC::JONASLEUNGWed May 11 1994 02:039
    Hi,
    
    Thanks for your help.  I have tried the modules on another backplane. 
    They all work fine.  It only fail on the specific backplane that I
    mention regardless of slot number.
    
    Regards,
    Jonas
968.3more info please...QUIVER::SLAWRENCEThu May 12 1994 12:387
    What exactly do you mean by 'report the 32 ports module of repeaters or
    termals as unsupported'?
    
    Please describe in detail what happens when you insert the module,
    quoting any messages _exactly_.  It might help to put the hub setup
    port into Event Log mode and quote the output from it.