[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

963.0. "3COM Etherlink and HUBwatch V2.0?" by STKHLM::DUFVA () Fri May 06 1994 08:39

    Hi,
    
    Here in Sweden we have currently three different customers that are
    trying to install HUBwatch for windows on PCs equipped with Etherlinks
    II-cards (3C503) and this seemes not to work.
    
    I'm not working with PCs myself, but according to the PC-folks here,
    the ENKII.DOS V1.1 driver is not compatible with Pathworks V5 (that
    is, LANmanager V2.2).
    
    I checked with 3COM support in the UK, but there where no later
    version of the driver. They admitted to have heard about `some
    problems with LANmanager V2.2B'.
    
    This should mean that HUBwatch/Windows V2.0 will never work on a PC
    with an Etherlink controller. Have anyone else tried this configuration
    and if so, did it work?
    
    Nils.
T.RTitleUserPersonal
Name		DateLines