[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
Moderator: | NETCAD::COLELLA DT |
|
Created: | Wed Nov 13 1991 |
Last Modified: | Fri Jun 06 1997 |
Last Successful Update: | Fri Jun 06 1997 |
Number of topics: | 4455 |
Total number of notes: | 16761 |
929.0. "DR 900FP plus DECbridge 900MX config" by CSOA1::TEATER (RCDD - Fight the Good Fight) Fri Apr 22 1994 22:05
I haven't heard about the DR 900FP (referred to in a previous note)
but it is a 12 port fiber repeater with pairs of port assignments.
This, I believe, solves a configuration for a proposal I am working on.
Will this work?
+----- fiber -> DEFLM on Ethernet A
:+---- fiber -> DEFLM on Ethernet A
::+--- fiber -> DEFLM on Ethernet A
:::+-- fiber -> DEFLM on Ethernet B
::::+- fiber -> DEFLM on Ethernet B
:::::
900MX 900FP 90C 900TM
| | | | | |
Ethernet A -----*-|----*-|-----*-----|--
| | |
Ethernet B -------*------*-----------*--
I can do this with the customer's existing Chipcom OnLine but would
rather replace it with a DEChub 900 since they do not have the Chipcom
bridge, UTP module, and enough fiber ports.
greg_t
T.R | Title | User | Personal Name | Date | Lines |
---|
929.1 | Ok | QUIVER::SLAWRENCE | | Mon Apr 25 1994 21:45 | 3 |
| Yup; this will work fine.
Each pair of fiber ports can be mapped to a backplane flex channel.
|