| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Is the following configuration posible. The intend is to have two main
segments in which the bridge will filter unneccesary trafic. The main
consern is if the DECbridge 900MX will redirect the outside ports to
the internall channels.
HUB 900
+--+---+--+--+---+--------+ seg. 2 +-----------------------+
|s | s |r |r |B +--------+---------+rep. 10baseT in hub_one|
|e | e |e |e |r | | +-----------------------+
|r | r |p |p |i | | seg. 2 +-----------------------+
|v | v | | |d +--------+---------+rep. 10baseT in hub_one|
|e | e |1 |1 |g | | +-----------------------+
|r | r |0 |0 |e | | seg. 1 +----------------------+
|9 | 9 |b |b |9 +--------+---------+serv. 900 in hub_one |
|0 | 0 |a |a |0 | | +----------------------+
|0 | 0 |s |s |0 | | seg. 2
|t | t |e |e |M +--------+------------------------------+
|m | m |T |T |X | | |HUB 900
++-+-+-++-++-+++-+--------+ +-+------+++-------+
| | | | || |r| |B| |
| | | | || |e| |R| |
seg.1 -+---+--+--+--++---------------- |p| | | |
seg.2 --------+--+---+---------------- |1| |9| |
seg.3 -------------------------------- |0| |0| |
Dechub 900 Internal Channels |B| |0| |
|T| |M| |
| | |X| |
| | | | |
+-+------+-+-------+
Edgar Nunez
San Juan, P.R.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 928.1 | QUIVER::SLAWRENCE | Mon Apr 25 1994 21:42 | 5 | ||
It looks from your diagram as though you have both repeaters on both
IMBs, which you can't do, but other than that I don't see a problem.
The Bridge will treats backplane ports just like front panel ports and
forwards between all of them.
| |||||