Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
Moderator: | NETCAD::COLELLA DT |
Created: | Wed Nov 13 1991 |
Last Modified: | Fri Jun 06 1997 |
Last Successful Update: | Fri Jun 06 1997 |
Number of topics: | 4455 |
Total number of notes: | 16761 |
A customer has find out the following with HUBwatch 1.1 and 2.0 for VMS. LED 6 of the DECbridge90FL stays always on (green) in HUBwatch also when the DECbridge90FL exceeded the maximum work group size (200). On the DECbridge90FL the led turns on (yellow) then. In the Bridge summary window the status about the WG exceeded works ok! The same happens with led 5 (Bridge Forwarding State) with is always off in HUBwatch. Make no difference if the port is in forwarding or in blocking mode. Again de status when you view the port with HUBwatch is working ok! This is not a real problem for the customer but when this is working in version 3.0 he is very happy I think? Ronald de Groot
T.R | Title | User | Personal Name | Date | Lines |
---|