[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

904.0. "DECbridge 90 and TCP/IP" by MLNTSC::DOMANESCHI () Fri Apr 15 1994 13:20

   Hi all, 

   I am looking for DECbridge 90 system managment documentation,on node 
   NAC:::SMART_HUB90: I see only the owner's manual.

   My customer would filter TCP/IP packets is it possible this?
   In the ownr's  manual this is not explained.
   Thanks in advance.
   
                         Paolo

T.R	Title	User	Personal Name	Date	Lines
904.1	thats the doc	CONSLT::BUZZELL		`Fri Apr 15 1994 16:58`	7
	The owners manual is the only one on the hardware. After connecting to the bridge type help and it gives examples. Use HubWATCH and set the filters with point and click. The HubWATCH users manual has details.
904.2		MLNTSC::DOMANESCHI		`Tue Apr 19 1994 12:00`	7
	Thank you for the reply. This mean that the customer must buy the HUBwatch software? Thank again. Paolo
904.3	Protocol filters are documented in the Owner's Manual	ROGER::GAUDET	Because the Earth is 2/3 water	`Wed Apr 20 1994 16:57`	9
	Paolo... As Ed pointed out, the only documentation on the DECbridge 90 is the Owner's Manual. However, this document does give information on how to set the protocol filters from the MOP console, so your customer does not need HUBwatch. What Ed was saying is that using HUBwatch's graphical interface is much easier than using the command line interface of the MOP console. ...Roger...
904.4	Oops Too Short	CONSLT::BUZZELL		`Wed Apr 20 1994 17:27`	5
	Actually thats what I was trying to imply in the second sentence. I guess thats what happens when you reply remotely and try to save words.